Tools Fixings & Hardware

The Knipex 03 06 Series Traditional Combination Pliers with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from a top quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. Chrome plated finish. The jaws have longer cutting edges for thicker cables and gripping zones for flat and round materials.

The Knipex 03 06 Series Traditional Combination Pliers with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from a top quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. Chrome plated finish. The jaws have longer cutting edges for thicker cables and gripping zones for flat and round materials.

Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life.

These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened.

The Knipex ErgoStrip® Universal Stripping Tool is used for the fast and precise dismantling and stripping of all common round and damp-proof installation cables (e.g. NYM cable 3 x 1.5mm² up to 5 x 2.5mm²), data cable (e.g. twisted pair) and coax cable. The innovative ergonomic pistol grip is designed for easy cutting, stripping and longitudinal cutting of the sheath. The conical slimmed down tool ends give better access in confined areas and there is a stripping device for cross-sections 0.2, 0.3, 0.8, 1.5, 2.5 and 4mm².

The Knipex 26 16 Series Snipe Nose Side Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish.

These Knipex 26 26 Series Snipe Nose Side Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish.

The Knipex 70 06 Series Diagonal Cutters are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. With a narrow head style for use in confined areas.

The Knipex 70 06 Series Diagonal Cutters are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. With a narrow head style for use in confined areas.

The Knipex 87 01 Cobra® Series Water Pump Pliers are made from chrome vanadium electric steel, which has been forged and multi-stage oil-hardened for excellent durability. The gripping surfaces have special hardened teeth, with hardness approx. 61 HRC to ensure high wear resistance and stable gripping. A press-button action allows fast and firm adjustment directly on the workpiece.

The KNIPEX BiX® Clever Pipe Cutter cuts pipes quickly, cleanly, and without shavings. It fits comfortably in the hand with a locking mechanism for safe transport.

These Knipex Series 95 Angled Electricians' Shears, with precision-ground blades and fine serrations for a clean, non-slip cut, provide cutting edges made from stainless steel, the hardness of the cutting edges is 56 HRC.

The Knipex 95 Series Cable Shears are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. For cutting copper and aluminium cables without crushing or deforming as well as multiple stranded cables. Not suitable for steel wire and hard drawn copper conductors.

Knipex 97 22 Crimping Pliers produced for insulated cable connectors and plug connectors as well as open, non-insulated plug connectors. With threaded holes for cutting copper and brass screws threaded (M2.6 / M3 / M3.5 / M4 and M5). Manufactured from high strength special steel for optimum work results and a long tool life. Fitted with multi-component grips. Its bolted joint provides higher stability and even movement.

The Knipex 975110 is a Crimping Plier for Western Plugs. It is a professional tool for cutting, and stripping, unshielded ribbon telephone cables.

Knipex Self-Adjusting Crimping Pliers for crimping end sleeves (ferrules) in accordance with DIN 46228 Parts 1 + 4. Also suitable for all twin end sleeves (ferrules) up to 2 x 6mm² or 2 x AWG 8. Adjusts automatically to the desired size of end sleeve. An integral lock (with release mechanism) provides consistent crimping pressure. Whilst the ratchet mechanism (unlockable) allows for repetitive, high crimping quality.