Tools Fixings & Hardware

The Knipex Pen-Style Control Cabinet Key has four different key profiles, and can be utilised by swivelling the key holder.

This Knipex Elektro VDE Pliers Set contains a selection of the most popular VDE pliers. All pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The slipguard prevents any spark over from non-insulated head to the hand. The heads are chrome plated for durability. Contains the following:

The Knipex 88 01 Series Alligator® Water Pump Pliers with dipped PVC handles and a box joint design prevents slipping from the workpiece. The gripping surfaces have special hardened teeth to approx. 61 HRC offering high wear resistance and stable gripping. They are made from chrome vanadium electric steel, that has been oil-hardened.

The Knipex 2 Piece Cobra® Pliers & Plier Wrench Set, contains the following:

The Knipex 11 06 Series VDE Insulation Strippers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from special tool steel, forged, oil-hardened. Chrome plated finish. Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut. For stripping single, multiple and fine stranded conductors with plastic or rubber insulation up to 5.0mm dia. or 10mm² cable cross-section.

The Knipex 14 26 Series VDE Side Cutters/Wire Strippers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from top quality Vanadium electric special tool steel and have been forged and oil hardened. Chrome plated finish. They have flat round jaws for gripping surfaces and, with the serrated edge, will give a better grip on the workpiece. The cutting edges will give the user a good clean cut.

The Knipex Electrician's Folding Knife has a high-quality, extremely sharp, stainless steel blade and a handle made from robust, shock-resistant plastic. Its ergonomic handle provides a comfortable grip and easy guidance. It is easy to open thanks to the practical diamond shaped grip on the blade. There is a useful tether attachment at the end of the handle.

The Knipex ErgoStrip® Universal Stripping Tool is used for the fast and precise dismantling and stripping of all common round and damp-proof installation cables (e.g. NYM cable 3 x 1.5mm² up to 5 x 2.5mm²), data cable (e.g. twisted pair) and coax cable. The innovative ergonomic pistol grip is designed for easy cutting, stripping and longitudinal cutting of the sheath. The conical slimmed down tool ends give better access in confined areas and there is a stripping device for cross-sections 0.2, 0.3, 0.8, 1.5, 2.5 and 4mm².

The Knipex 86 03 Series Pliers Wrench with dipped PVC handles and smooth parallel jaws for cautious installation of plated fittings or sensitive surfaces. More effective, faster and greater capacity than an adjustable spanner of the same size.

The Knipex 86 03 Series Pliers Wrench with dipped PVC handles and smooth parallel jaws for cautious installation of plated fittings or sensitive surfaces. More effective, faster and greater capacity than an adjustable spanner of the same size.

The Knipex 95 Series Cable Shears are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. For cutting copper and aluminium cables without crushing or deforming as well as multiple stranded cables. Not suitable for steel wire and hard drawn copper conductors.

Knipex 97 22 Crimping Pliers produced for insulated cable connectors and plug connectors as well as open, non-insulated plug connectors. With threaded holes for cutting copper and brass screws threaded (M2.6 / M3 / M3.5 / M4 and M5). Manufactured from high strength special steel for optimum work results and a long tool life. Fitted with multi-component grips. Its bolted joint provides higher stability and even movement.

The Knipex 97 52 36 PreciForce® Crimping Pliers offer good repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism).

The Knipex 98 Series Cable Knife is fitted with a ergonomically designed handle, VDE tested up to 10,000V and safe for work up to 1,000V. Conforms to DIN EN / IEC 60900. The handle provides a confident grip thanks to slip-proof soft components. It also features a comfortable slip guard.