Tools Fixings & Hardware

Olympic Tape Measures come with a soft grip rubber cover, magnetic end hook, belt clip, and wrist strap. Metric and imperial graduations and tri stop functions.

• For drilling the hardest tiles and materials such as PEI class 5 porcelain, ceramics, fine stoneware, marble, concrete, engineering brick and even granite
• The drill bit works best at low revolution speeds
• Drill machines with a variable speed trigger will achieve the best results
• The drill bit should be used on the rotary setting and must not be used on the hammer setting

Olympic SDS Hammer Drill Bits incorporate Tungsten Carbide tips conforming to DIN 8035.They are suitable for all hammer drilling machines with SDS+ drive system, supplied individually on plastic hanging clips

• For use with rotary and hammer action tools
• Suitable for drilling concrete, stone, brick, masonry, ceramic, slate & marble

• Suitable for drilling into hard materials such as concrete, rock, brick, stone and granite
• Heavy Duty Drilling

• Suitable for Steel to Steel Fixing
• Head design prevents snagging on cables and prevents component distortion
• Large flat under head area reduces the need for a washer

Olympic SDS Hammer Drill Bits incorporate Tungsten Carbide tips conforming to DIN 8035.They are suitable for all hammer drilling machines with SDS+ drive system, supplied individually on plastic hanging clips

Olympic Hexagon Head Plain Drillers are manufactured to DIN 7504K and are steel to steel fixings. They are made from C1022 case hardened steel with a hexagon flange head and are bright zinc plate finished. Ideal for fixing switchgear boxes and brackets to internal steelwork.

• Suitable for Steel to Steel Fixing
• Light & Heavy Sections available to suit different steel thicknesses

• Suitable for Steel to Steel Fixing
• Light Section

Olympic Masonry Drills are Tungsten Carbide tipped with a hardened body shank. They conform to DIN 8039 and are suitable for all drilling machines with a 3 jaw chuck. Supplied individually in hanging wallets

Olympic Twist Drills are manufactured in a roll forged, black finish with a straight shank conforming to BS 328 & DIN 338.They are designed to be used in fast rotating drilling machines and are supplied in hanging telescopic cases.

Olympic Fixings 5.5mm x 38mm Light Washered Hexagon Head Self Drilling Screws suitable for general fixing applications. Key features include hexagon flange head; assembled with EPDM galvanised steel washer; and C1022 case hardened carbon steel.

Olympic Fixings 5.5mm x 40mm Wafer Head Self Drilling Screws suitable for general fixing applications. Key features include hardened steel Self-drilling screws offer all the advantages associated with standard self-tapping screws; capable of drilling their own pilot holes into sheet metal; and should always be installed using a power-driver.

Olympic Fixings 50mm x 50m Gaffer Tape Silver suitable for tapes. Key features include general purpose cloth tape; shrink wrapped individual rolls; and available in two colours.

• For Corrosion Protection in oil, gas, water and waste pipelines, buried and exposed pipework, pipeline joints and fittings, valves, couplings, flanges and flange adaptors, tie bars, rods and cables as well as structural steelwork