The SULTAN LED corrosion proof provides excellent light uniformity with limited glare boasting a 50,000 hour average lamp life with IP65 rating and stainless steel clips - making it the perfect choice for external applications
The range provides energy efficient replacement for traditional T8 fluorescent fiiitngs up to 2x70W
The fitting is flexible to prevent cracking when mounted on uneven surfaces and is less susceptible to failure due to building vibration caused by temperature fluctuations
suitable for workshops, garages, warehouses, car parks, farm buildings, wet areas
Suitable for switching by PIR, Microwave or Photocell
Options available through Conversions: 0-10V Dimmable, Microwave Sensor
Suitable for both surface and recessed indoor applications
Injection moulded ABS body - impact resistant
Plug in terminal block and sensor module
Large terminals accept 2 x 1.5mm² conductors in each terminal; facility to loop in/loop out to parallel sensors or multiple fittings
Adjustable time delay of 10sec to 40min ensures that lighting is switched off with required delay
Adjustable lux setting of 10 to 2000lx
Detection range 360°, detection distance 10m at 2.8m mounting height
Passive infra-red; ensures light is switched on when sensor detects movement of heat, therefore lighting is switched off when the area is vacated and minimize false/unwanted triggering
Adjustable passive photocell; inhibits switching where natural light is sufficient
High load contact rating; allows numerous fittings to be switched
The SULTAN LED corrosion proof provides excellent light uniformity with limited glare boasting a 50,000 hour average lamp life with IP65 rating and stainless steel clips - making it the perfect choice for external applications
The range provides energy efficient replacement for traditional T8 fluorescent fiiitngs up to 2x70W
The fitting is flexible to prevent cracking when mounted on uneven surfaces and is less susceptible to failure due to building vibration caused by temperature fluctuations
suitable for workshops, garages, warehouses, car parks, farm buildings, wet areas
Suitable for switching by PIR, Microwave or Photocell
Options available through Conversions: 0-10V Dimmable, Microwave Sensor