Lighting

Featuring a unique design which allows selection between two wattages and three colour temperature to suit requirements of any application. Serves as an LED alternative to1x or 2x18W T8 fluorescent surface fittings. The EARL 2 has low profile aluminium housing with polycarbonate end caps and diffuser. The large screw terminal block allows max 2.5mm² conductors. Suitable for switching by PIR, Microwave or Photocell.

* Smooth white finish polycarbonate body provides a easy to wipe clean to retain as new aesthetics * Opal diffuser with built in prisms provides maximum light is transmitted through the diffuser, and reduced glare * CCT3 selectable and built-in dimming functionality * Very low power consumption of less than 10W offers 80% energy savings compared to linear incandescent shaver lights * Selectable dual voltage output switch suitable for UK 230VAC or other 115VAC shavers * IP 44 Ideal for installation outside of bathroom zones 1 & 2

* Low profile recessed extrusion with push on PC diffuser * Wide enough to fit all Vegas and Macau strip (including VEGAS RGBW IP67) and new IP20 connectors * Anodised aluminium * Supplied in 2m lengths complete with end caps

Low profile surface mounted extrusion with push on PC diffuser * Wide enough to fit all Vegas and Macau strip (including VEGAS RGBW IP67) and new IP20 connectors * Anodised aluminium * Supplied in 2m lengths complete with end caps and mounting clips

The GOLF EXPRESS MODULAR is our most flexible and versatile surface fitting design yet. Allows selection between three wattages and three colour temperatures, while available plug and play sensors (on/off and 3 step dimming) and emergency pack to suit any needs. Available off the shelf as standard, sensor, emergency and emergency plus sensor. With a high impact protection of IK08 and high efficiency Pro-Diffuser provides maximum light transmission and excellent light uniformity with reduced glare for a more comfortable working environment. Contains conduit entry points and centre body BESA box mounting facility provide options to cater for most surface or conduit wiring infrastructures.

The GOLF EXPRESS MODULAR is our most flexible and versatile surface fitting design yet. Allows selection between three wattages and three colour temperatures, while available plug and play sensors (on/off and 3 step dimming) and emergency pack to suit any needs. Available off the shelf as standard, sensor, emergency and emergency plus sensor. With a high impact protection of IK08 and high efficiency Pro-Diffuser provides maximum light transmission and excellent light uniformity with reduced glare for a more comfortable working environment. Contains conduit entry points and centre body BESA box mounting facility provide options to cater for most surface or conduit wiring infrastructures.

The GOLF EXPRESS MODULAR is our most flexible and versatile surface fitting design yet. Allows selection between three wattages and three colour temperatures, while available plug and play sensors (on/off and 3 step dimming) and emergency pack to suit any needs. Available off the shelf as standard, sensor, emergency and emergency plus sensor. With a high impact protection of IK08 and high efficiency Pro-Diffuser provides maximum light transmission and excellent light uniformity with reduced glare for a more comfortable working environment. Contains conduit entry points and centre body BESA box mounting facility provide options to cater for most surface or conduit wiring infrastructures.

The GOLF EXPRESS MODULAR is our most flexible and versatile surface fitting design yet. Allows selection between three wattages and three colour temperatures, while available plug and play sensors (on/off and 3 step dimming) and emergency pack to suit any needs. Available off the shelf as standard, sensor, emergency and emergency plus sensor. With a high impact protection of IK08 and high efficiency Pro-Diffuser provides maximum light transmission and excellent light uniformity with reduced glare for a more comfortable working environment. Contains conduit entry points and centre body BESA box mounting facility provide options to cater for most surface or conduit wiring infrastructures.

Plug and play sensor for the GOLF EXPRESS MODULAR range. Adjustable detection range of 10/25/50/75/100% and lux settings of 2/25/50lx or disabled with a time delay 5s/30s/90s/3min/20min/30min. Maximum switching load of 400W and Maximum mounting height of 6m.

GOLF SLIM MODULAR offers tripple wattage allowing selection between 12W 15W and 18W outputs. CCT swith on the LED tray allows selection between 3000K 4000K and 6500K. Slim profile with a height of only 50mm. High impact resistant polycarbonate/ABS housing providing an Impact Rating of IK08. Can be easily converted to emergency or sensor version using plug and play accessories: emergency pack RMSEM-PSU and microwave with corridor fucntion RMSCRS-01

Robus Harbour Express 25W - 50W 5ft LED CCT Selectable Non Corrosive Fitting suitable for non-corrosive fittings. Key features include lED NCF, ideal for retrofit of existing T5 or T8 fittings; wattage selectable [25W / 33W / 42W / 50W]; and colour selectable [4000K / 5000K / 6500K].

Accelerate every step of your installation with HARBOUR Express. Featuring a unique design allowing switching between 16W, 20W, 26W or 32W and CCT selectable between 4000K, 5000K or 6500K colour temperature to suit requirement of any project. The IK10 rating insures very high impact protection. Boasting a high efficacy of up to 165lm/W and the perfect LED replacement for 2x to 4x 18W fluorescent corrosion proof fittings. The IP66 rating makes it ideal for workshops, garages, warehouses, car parks, farm buildings, wet areas. Wide ambient temperature operation range of -20°C +40°C. Suitable for switching by PIR, Microwave or Photocell.

Robus Harbour Express 8W - 16W 2ft LED CCT Selectable Non Corrosive Fitting suitable for non-corrosive fittings. Key features include lED NCF, ideal for retrofit of existing T5 or T8 fittings; wattage selectable [8W / 10W / 13W / 16W]; and colour selectable [4000K / 5000K / 6500K].

Available for collection only.

• Suitable for workshops, garages, warehouses, car parks, farm buildings, wet areas
• LED replacement for 2 x 58W fluorescent corrosion proof fitting
• 50,000 hour average lamp life
• Polycarbonate housing and the diffuser providing high impact protection rating of IK08
• Complete with stainless steel clips and screws
• Can easily be converted to emergency using RLEMPKDT-PSU sold as an accessory
• Plug and play microwave sensor available as an accessory (RLMW)
• High efficacy of 123lm/W
• Wide ambient temperature operation range of -20°C +40°C
• Suitable for switching by PIR, Microwave or Photocell

* Replacement retention clip for R101/R108 downlight

* Suitable for use in domestic and commercial outdoor applications for decorative lighting * LED replacement for 50W Halogen * Fully polycarbonate housing for high corrosion resistance * High impact rating of IK06 * Head adjustable angle of 180° * Complete with stainless steel screws * Prewired with 1m rubber flex * Wide operating ambient temperature range of -20°C to +45°C * Suitable for switching by PIR, Microwave or Photocell