Search
Show prices inc VAT Show prices ex VAT
Show prices inc VAT
View Products
    Menu Close

    Accessories

    Find all the essential components that complete your solar installs — from connectors, rotary isolators, optimisers, and smart meters to isolators and surge protection. We stock a wide range of reliable, installer-approved accessories to keep your installs tidy, safe, and fully spec-compliant.

    ☀️ Solar Energy
    🔋 Battery Storage
    🚗⚡ EV Charging
    View as Grid List
    Sort by
    Display per page
    Picture of MyEnergi Hub Wireless Interface For Older Eddi/Zappi Units

    MyEnergi Hub Wireless Interface For Older Eddi/Zappi Units

    HUBV2

    hub is only needed for eddi/zappi that do not have built in WiFi/Ethernet

    Providing internet connection to your other myenergi devices making them ‘smart’.

    The hub and app work together to remotely control and monitor your products from anywhere in the world! The hub also allows you to carry out firmware updates to keep your myenergi products equipped with all the latest features in this rapidly evolving industry.

    €98.22 inc VAT
    Picture of Set of SEAI compliant PV Warning Labels

    Set of SEAI compliant PV Warning Labels

    GLABELS

    These SEAI compliant stickers save you the cost and hassle of designing and printing a short run of these warning labels, essential for all grid-tie PV installations.

    Printed on high-quality vinyl, the sticker sheets measure 280x210mm for the main label sheet and 140x210mm for the high voltage sheet, both of which are required.

    For best results, apply the labels to a smooth, flat, non-porous surface. 

    €8.07 inc VAT
    Picture of SpeedFlash Slate Flashing with Foam Insert

    SpeedFlash Slate Flashing with Foam Insert

    S-FLASH
    The SpeedFlash® streamlines solar installations on slate roofs with a quick, no-‘drill through slate’ method that preserves roof integrity. Ideal for 18″+ slates, it minimises the need for slate removal. Not for 4″ headlap composite slates.
    €0.00 inc VAT
    Picture of Termtech TTMC4 Solar Cable Connector 1P68 16A

    Termtech TTMC4 Solar Cable Connector 1P68 16A

    TTMC4
    The Termtech TTMC4 is a solar cable connector pack, which includes both male and female connectors. Designed for photovoltaic systems, the solar cable connectors are made from IP65 rated PPO (Photo Phenylene Oxide) and feature a nylon nut.
    €3.46 inc VAT
    Picture of ProJoy PEFS-EL 4 Pole 40A MC4 Fire Fighter Switch

    ProJoy PEFS-EL 4 Pole 40A MC4 Fire Fighter Switch

    PJFFS40A
    PROJOY PEFS-EL Series String-level Firefighter Safety Switch can be applied to residential and C&I solar PV projects, its maximum loop voltage can be up to 1500V which meets the requirements of high-power panel. In case of emergency, it can quickly cut off the high voltage between the PV Modules and the solar inverter, ensuring the safety for your photovoltaic system.
    €142.99 inc VAT
    Picture of ERS-2/4Series PV Array Level 4 Pole 2 String Firefighter Safety Switch for Solar

    ERS-2/4Series PV Array Level 4 Pole 2 String Firefighter Safety Switch for Solar

    ERS40-4
    The ERS Series Rapid Shutdown Switch (RS Switch) is designed to enhance safety in photovoltaic systems. In the event of a fire, firefighters can remotely disconnect the AC power before proceeding with extinguishing, while the built-in DC isolation switch automatically disengages upon detecting a grid signal. This ensures fast and reliable system shutdown.
    €193.73 inc VAT
    Picture of NOARK 25A B Type RCBO 100mA 2P

    NOARK 25A B Type RCBO 100mA 2P

    107672
    • Rated Current: 25A
    • Rated Residual Current: 100mA
    • Breaking Capacity: 10kA
    • Tripping Curve: Type B
    • Poles: 2 (1+N)
    • Width: 2 modules
    • Operating Temperature: -25°C to +40°C
    • Complies with EN 61009
    • Ideal for sensitive applications with high safety demands
    €59.58 inc VAT
    Picture of NOARK 32A B Type RCBO 100mA 2P

    NOARK 32A B Type RCBO 100mA 2P

    107673
    • Rated Current: 32A
    • Rated Residual Current: 100mA
    • Breaking Capacity: 10kA
    • Tripping Curve: Type B
    • Poles: 2 (1+N)
    • Width: 2 modules
    • Operating Temperature: -25°C to +40°C
    • Complies with EN 61009
    • High reliability for sensitive circuits and installations
    €59.58 inc VAT
    Picture of NOARK 40A B Type RCBO 100mA 2P

    NOARK 40A B Type RCBO 100mA 2P

    107674
    • Rated Current: 40A
    • Rated Residual Current: 100mA
    • Breaking Capacity: 10kA
    • Tripping Curve: Type B
    • Poles: 2 (1+N)
    • Width: 2 modules
    • Operating Temperature: -25°C to +40°C
    • Complies with EN 61009
    • Ideal for high-demand circuits needing sensitive protection
    €59.58 inc VAT
    SDM120DB

    MID Single Phase Din Rail Mounted Digital KWh Power Meter 1 MOD 45A Digital Display

    SDM120DB
    • 45A Single phase direct connected
    • MID Certified (B and D)
    • 1000MP/kWh Pulsed output
    • 1 module DIN rail mounted
    • Digital backlit display
    €39.67 inc VAT